Welcome.
Description of the problem.
Freshly installed Windows Server 2012.
The problem when I tried to configure Windows Backup (from GUI console), I want to save data volumen RAID1 composed of two dynamic disks 3TB. Unfortunately, any attempt to create a backup ends the same way - the system hangs. In event viewer I do not see anything
meaningful.
After the restart, the data that was previously stored on the disk (RAID1 volumen) are OK.
For disk resynchronization is performed as follows:
http://sv039.sendspace.pl/cache/img/2012/11/26/38/8a28312d18726b855592ba4.1100x1100.jpg
I tried several times to repeat the same procedure - the result is the same - the system hangs.
There is no problem when instead of RAID1 (dynamic disks) use the disk as the primary partition with a capacity of 3TB... but I want software RAID :/
Has anyone encountered a similar problem?